Cafe doors – Custom made for bars saloons using 3/4 thick select cherry & curly maple hardwood. These beautiful doors are handmade to fit your opening measurements with a standard height of 40. If you’re looking for a unique door unlike anything else you’ve found, these doors are for you. They are assembled with glued and doweled butt joints in a Shaker style that compliments almost any decor. Designed and built 1 less than opening width to accommodate standard gravity pivot hinges from Everbilt (1 set included with each door pair). The curly maple is left unstained and the cherry is stained with a light brown color to bring out the natural grain (unless ordered unfinished). The finish used is Olympic water-based Satin Polyurethane that gives a very smooth finish. The 1″ deduction is for a 3/8″ space at each side & a 1/4 space between door leaves t. His is what was done on door pictured. The horizontal center trim was used to join 2 smaller pieces of maple together, and may be eliminated if large enough stock can be found. Well figured curly maple is hard to find in lengths over 24, but I have several sources and can sometimes get it. I will include detailed installation instructions that should be used in conjunction with Everbilt’s general instructions to get a better fit and operation. 24″ to 26″ doors are trimmed w/ 1×3 cherry (3/4″x2 1/2″ actual) and 28″ to 32″ doors are trimmed w/ 1×4 cherry (3/4″x3 12″ actual). The item “Cafe doors Custom made for bar saloon with select cherry & curly maple hardwood” is in sale since Tuesday, June 30, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Doors”. The seller is “txrkitct” and is located in Carrollton, Texas. This item can be shipped to United States.
- Material: Wood
- Closing Mechanism: Swinging
- Brand: Handmade
- Color: natural
- Door Configuration: double swinging doors
- Type: Swinging Cafe Bar Saloon Door